16mm long stainless pins with m5 tap
morning all
i thought id throw this in here save me struggling with my poor aldi bench drill and hacksaw.
what am i looking at to get some 8mm bar parted at 16mm lengths and an M5 Thread putting in, the threads not going through the length of it but going through the side centre/middle right through the 8mm dia. 100-200 peices.and most likely more after that
i can get the stainless 8mm bar at a tenner a metre forwarded.ta
16mm long stainless pins with m5 tap
Drop AdCNC a message. :-)
Re: 16mm long stainless pins with m5 tap
Thanks dman,i,ll just leave it where it is and if anyone wants it they,ll get in touch ;)
16mm long stainless pins with m5 tap
Sorry didn't want to single out one guy, reason being i use him for most of my work, so I can recommend him that's all. Probs should of explained it better :-p
Re: 16mm long stainless pins with m5 tap
Quote:
Originally Posted by
deisel
morning all
i thought id throw this in here save me struggling with my poor aldi bench drill and hacksaw.
what am i looking at to get some 8mm bar parted at 16mm lengths and an M5 Thread putting in, the threads not going through the length of it but going through the side centre/middle right through the 8mm dia. 100-200 peices.and most likely more after that
i can get the stainless 8mm bar at a tenner a metre forwarded.ta
Hi Deisel, I have just seen your RFQ, are you still looking for quotes? Regards
Re: 16mm long stainless pins with m5 tap
How soon would you need them?
Quote:
Originally Posted by
deisel
i can get the stainless 8mm bar at a tenner a metre forwarded.ta
Sounds expensive - I can get it for £2.62 per meter.
Re: 16mm long stainless pins with m5 tap
Re: 16mm long stainless pins with m5 tap
Wouldn't it be cheaper to just buy them rather than get someone to make them or am I missing something?
You can buy m5 barrel nuts at 16mm long in both stainless & alloy.
Re: 16mm long stainless pins with m5 tap
Quote:
Originally Posted by
martin54
Wouldn't it be cheaper to just buy them rather than get someone to make them or am I missing something?
You can buy m5 barrel nuts at 16mm long in both stainless & alloy.
thanks martin i feel like a prize one, id given up searching for the things but it does help when you know the appropriate name for them,id typed everything from cam lock pins to..
,ive found a match on ebay but there in zinc,i,ll keep looking for the stainless,thanks lad
Re: 16mm long stainless pins with m5 tap
Quote:
Originally Posted by
deisel
thanks martin i feel like a prize one, id given up searching for the things but it does help when you know the appropriate name for them,id typed everything from cam lock pins to..
,ive found a match on ebay but there in zinc,i,ll keep looking for the stainless,thanks lad
Hi Deisel, I'll do them for £0.75 each, regards Gary