Re: New Memeber and very new to CNC
Quote:
Originally Posted by
jamhot
Yeah good thinking - I thnk I need to get some blocks of wood or smilair material to test on (and use as a safty bed)! Thanks.
wood will stick break tools soft but firm material is what you want.
Re: New Memeber and very new to CNC
Quote:
Originally Posted by
JAZZCNC
wood will stick break tools soft but firm material is what you want.
What material do you use, or would recommend? Thanks.
Re: New Memeber and very new to CNC
Quote:
Originally Posted by
jamhot
What material do you use, or would recommend? Thanks.
Re read post #9
Re: New Memeber and very new to CNC
Oops silly me, thanks I'll grab some of that - Cheers.
Re: New Memeber and very new to CNC
Go to Wickes and buy the floor insulation, about £5 for a 1200x400x50 piece I think. I use bits of packaging to practise if I'm not sure, like the below...
https://uploads.tapatalk-cdn.com/201...9b3aa615ff.jpg
Sent from my HUAWEI VNS-L31 using Tapatalk
Re: New Memeber and very new to CNC
Quote:
Originally Posted by
njhussey
Ok, I'm liking these ideas. Maybe I should buy something from Amazon, the packing should last me a while - thanks