15 Attachment(s)
Cyclone Chip/Dust Extractor for under £20!
Hi guys,
I had a go at making a cyclone dust extractor.
I used;
1 Old broken hoover I had in the attic. Dump nothing!
1 Traffic cone I acquired one drunken night way back..!
2 Plasterer's buckets I bought for this job - £14.
2 Flangey plastic screw-on fixture thingys from the same shop - £3.
2 Plastic spring-clamps.
1 Shampoo bottle.
Lots of Duct tape.
It works a treat.
I managed to bodge all of the hoover attachment bits out sawing up of the old hoover
tube bits. I even got the the angled bit off it!
The best bit is how the traffic cone just sticks to the bucket! I just jammed it up
in there and it worked! If it ain't broke...!
I am very happy with how it works. It gets 90% of the chips and dust. I have filled
the bottom bucket 3 or 4 times now and the hoover bag isn't even half filled!
I'm open to suggestions for improvements!
Thanks guys,
Kevin.
Attachment 16254Attachment 16255Attachment 16256Attachment 16257Attachment 16258Attachment 16259Attachment 16260Attachment 16261Attachment 16262Attachment 16263Attachment 16264Attachment 16265Attachment 16266Attachment 16267Attachment 16268