Max's little robot shop- great info on tooling and diy injection molders
Re: Max's little robot shop- great info on tooling and diy injection molders
Quote:
Originally Posted by
gavztheouch
Max's Little Robot Shop - NeRP - Neighborhood Roving Platform
above link is a walk through on making a mold tool.
Re: Max's little robot shop- great info on tooling and diy injection molders
Such fun (smily face) :tickled_pink: excellent web find (big thumbs up)
Interesting use of springs to withdraw the ejectors, wonder why. I had the notion that you used the ejector ram to pull the ejectors nearly back, so they could not possibly touch the opposite mould plate, then used extra pins to connect that plate to the ejector plate and finish the job (perplexed smily)
Re: Max's little robot shop- great info on tooling and diy injection molders
I always thought they used springs to retract the ejector pins?
The ejector pins don't touch the opposite mould plate, that's the core pins that touch it.
Re: Max's little robot shop- great info on tooling and diy injection molders
Has anybody checked out the Injection Moulding machine pages?
Home Injection Molding
It's a bit...erm...elaborate.
Kudos to the guy for doing it, but the machine does seem overly engineered!
Re: Max's little robot shop- great info on tooling and diy injection molders
Quote:
Originally Posted by
m_c
I always thought they used springs to retract the ejector pins?
The ejector pins don't touch the opposite mould plate, that's the core pins that touch it.
Don't take me as some kind of expert for Gawd's sake (look of horror smiley)
I have done lots of reading about making moulds but I have never seen springs used before.
Is it possible his ejection mechanism can only push? (bewildered smily)
Re: Max's little robot shop- great info on tooling and diy injection molders
Hi Robin
Going from the worksmanship and design of some of this guys kit i would think he comes from a heavy engineering(MIL Spec) type background. My mate used to make die4s for an Electrical Component Factory and i am sure he has mentioned ejector springs when he has talked about it.
Will ask him in the morning(if i remember)
Mike
Re: Max's little robot shop- great info on tooling and diy injection molders
Check out his gallery page, guy is hardcore on everything.
.Me
Re: Max's little robot shop- great info on tooling and diy injection molders
I think, springs are not used to eject any product.