I need help!
I have the g-code .The machine go from point A to point B following the path(the z axes no mater). I want my machine when he reach point B to go back to point A following the path and to repeat that for 6 time.
Printable View
I need help!
I have the g-code .The machine go from point A to point B following the path(the z axes no mater). I want my machine when he reach point B to go back to point A following the path and to repeat that for 6 time.
OK, so what's the question? What do you need help with and what is the problem?
I undestand how the machine work.
Ok
Point A X0Y0
Point B X600Y600 to go back to A X0Y0 easy when are only 3 .points..code line easy
Point A X0Y0
Between the points are from start to end 43578 points complicate shape
Point B X600Y600 from hire to go back (from end to start) through all 43578 to Point A
Like ping-pong move. ...
Draw it in CAD and use CAM!
Hey man,
Try this neat little on-line tool:
https://www.miniwebtool.com/reverse-lines/
Basically it reverses line order - just pay attention to what you're doing... (ie. canned cycles, G02 commands etc. will throw a spanner in the works - this method will only work point to point..!)
Wal.
Thank you Wal ! This is ...