Looks nice and beefy!!!
Printable View
Looks nice and beefy!!!
Small update!
Pimped my y axis a bit ;)
And a question.
My motors have filed down shafts for good connection with pulley setscrews.
Should I file a groove in the ballscrew or is it to hard to mark? :)
Don't want it slipping in action later...
This week I'm hoping to motorize my first axis.. have motors, drivers, pulleys and a license to uccnc. Waiting to get an uc300 in the mail :D Chinese BOB will have to do for testing (because I have it)
Still missing pulley belts but that might solve itself aswell hehe
https://preview.ibb.co/gadfmk/20170827_202401.jpg
Generally the bits that have been machined (ie the ends) aren’t that hard as the case hardening is gone. I’ve never had any issue grinding a flat for a screw
Looking good have you drilled the plate for the spindle?
Yeah there are some holes prepared with m8 thread at the lower part of the plate.
Have to order the standard spindle clamp from ebay or maybe have one made ;)
The holes I made for the ballnut bracket are a little low on the plate.. don't really know what I was thinking when I drew that up :D
Skickat från min SM-N910C via Tapatalk
Small update!
I think there is smooth action going on..
https://youtu.be/KQl2zc84KsM
How do I embed youtube links? :D
One more thing.. I repacked my stiff linear bearing. I was right! There was one ball in the wrong track!!
Now it's smooth so when I get time I'm gonna mount my y axis aswell :D
click the insert video link it's next to the insert picture then paste the youtube link.
Attachment 22783
Looking good there if it was me I push the gantry and it would fall off lol.