As the title DIYCNC version 2 board does anybody have a manual please?
Printable View
As the title DIYCNC version 2 board does anybody have a manual please?
I looked back through their website's various incarnations and couldn't find a Version 2 board
https://web.archive.org/web/*/www.DIYCNC.co.uk
Yes thanks I had checked that. I am using this as an experiment because it can accept at 15-70 V and then give out 12V and 5V with its built in regs. I am also using one of those crap Chinese bobs to drive a mill with 3 mpg's and separate homing on each axis. with Linuxcnc. The crap board needs 12-24V plus 5V. I will then have 10 inputs 6 for the mpg's and 3 for the homing etc.Quote:
Originally Posted by magicniner
So if it didn't feature anywhere on DIYCNC's site is it one of the currently available Chinese boards?
That's because It's actually an Opto V3.? Roy only supplied V2 for a very short time but this board Clive as is V3, even thou marked v2. The reason I know is that I gave it to him.Quote:
Originally Posted by magicniner
Thanks for the manual Dean:thumsup:Quote:
Originally Posted by JAZZCNC