Re: Not Just another Boxford tcl 125 thread....
Quote:
Originally Posted by
cooliced
its not rotary, its a fixed quick release one.
Dixon?
It should take t00 sized holders then, have a look around big tool suppliers like cromwell, msc, buck&hickman, and i'm sure there's many others. They will do either a grooved holder or a morse taper holder that you can fit drills or chucks into.
Dixon is the recognised brand, like Hoover for vacuum cleaners.
Re: Not Just another Boxford tcl 125 thread....
Quote:
Originally Posted by
cooliced
yeah fully understand that... ive probably got some shite tooling and its crap.
dont really wanna be buying it of the bay then?
ebay's not a problem but buy the better quality stuff, if you want your tooling to be repeatable (indexable) when changing tips.
Re: Not Just another Boxford tcl 125 thread....
i bought some t0 holders off ebay, but had to linish the backs to get them to slide into mine.
(retrofitted mine with mitsubishi servos)
Re: Not Just another Boxford tcl 125 thread....
Quote:
Originally Posted by
battwell
i bought some t0 holders off ebay, but had to linish the backs to get them to slide into mine.
(retrofitted mine with mitsubishi servos)
I'd love to see that 125 with servos.
Re: Not Just another Boxford tcl 125 thread....
havnt read the thread end to end but there is a cheap gemini on ebay, finishing soon
http://cgi.ebay.co.uk/ws/eBayISAPI.d...:B:WNA:GB:1123
Re: Not Just another Boxford tcl 125 thread....
i only have a couple of videos of it
heres one
http://www.youtube.com/watch?v=7E-TmwYuJNA
she now moves at 6000mm/min totally accurate (as accurate as the screws anyway as i couldnt be bothered to change them)
Re: Not Just another Boxford tcl 125 thread....
So the bits arrived today. only the resistors and cable
changed the cable, seemed to be a bit better and the steppers ran for alot longer before the PSU cut out.
Both gecko's now running 2 amps to the steppers so thats fine.
but it still keeps tripping the bloody PSU.
So i thought i would do some testing.
i found this http://www.geckodrive.com/upload/returnedenergydump.pdf
just wondering if that could be the case?
Does anybody have an idea how to test the gecko's to make sure there not the problem?
Re: Not Just another Boxford tcl 125 thread....
bump,
p.s. got another laptop to try with Mach3 and EMC2, hopefully one will work :D
Re: Not Just another Boxford tcl 125 thread....
How do Cooliced.
Are you running this machine through laptops? I read somewhere that some laptops don't deliver a full 5v pulse to the drivers,not saying this is your problem mind...but its worth checking the 5v rail on the bob underload?
Re: Not Just another Boxford tcl 125 thread....
well tbh i was gonna bite the bullit and use my Main Desktop PC and run the laptop downstairs (more user friendly)
I have read that somewhere too... hmm. thanks GeorgeD