Ok, thanks! :smile:
Printable View
Ok, thanks! :smile:
Hi!
I’m about to get the remaining parts that I need for the PSU and I would need some input.
Here is what I got so far.
Toroidal transformer, 2x36V, 800 VA. I intend to wire the secondary in parallel to get about 48V rectified.
A cap rated 80V, 27000 uF.
Looking at a rectifier rated at 600V 35A. I learned that the rectifier values should exceed the actual values.
My steppers are rated at 5 amps max and there’s 4 of them. Is it a problem choosing a rectifier that exceed the actual Volts to much?
Do I need a bleed resistor over the cap? If so, any recommendations of the proper value of the resistor?
Any recommendations regarding fuses? Type, value and so on?
I don’t know what they are called in English but I have seen like a flip fuse mounted on a din rail beside the PSU.
Volt readouts?
Would appreciate some input and input in general here, thanks! :smile: