5 Attachment(s)
Unimatic EduCAM 10 for sale
Unimatic EduCAM 10 for sale
model CNC-PPM-0322
580 x 580 x 760mm
Approx 60kg
Comes with Galaad cam software and the all important usb dongle licence key required to operate the machine. Manual and pack of spanners & collets etc.
I got it for making smaller parts but never got round to using it. The intention was to convert it over to run Mach3 so I have set of drivers and BB for it. I have too much stuff so it needs to go. I've finally powered it up and tested all axis and spindle and the unit seems fine:encouragement:! Travel is smooth and no smoke or noisy fans. Has been PAT tested. Its a nice German built unit which can apparently cut aluminium with the proper toolpath and workholding. The machine tables are made of T-nut profiles providing optimal clamping possibilities. The enclosure has been designed with a hoover/ extraction port at the back for dust/fume removal.
I also have a set of digital DM556 drivers and a break out board for a conversion if they are of interest as an additional sale.
Looking for around £750 for Unimatic EduCAM 10 and software.
Collection only from Glasgow.
Attachment 31009
Attachment 31010
Attachment 31011
Attachment 31012
Attachment 31013
Re: Unimatic EduCAM 10 for sale
do you still have theis ?
07817 200279
Re: Unimatic EduCAM 10 for sale
Quote:
Originally Posted by
j.c.freeman
do you still have theis ?
07817 200279
Yes. Its still available.