Looks good, are you sure you've not done this before? Shorting out??? Do tell???
Printable View
I connected the wires for the panel estop to the 24v fault indicator and the wires for the indicator to the estop meaning the 24 supply was just pumping current to itself. It took me a while to figure out what I had done wrong and it made a funny noise each time I switched it on to check if I had fixed it but it still seems to work! Whoops [emoji51]
Video showing the installation of my panel controls:
http://<a href="https://youtu.be/bgK...KEZsiwfB0 </a>
And one showing the installation of the cabinet fans... this job sucked!
http://<a href="https://youtu.be/jJD...JDP88FGMns</a>
Hi Joe
Both links not working for me ?
Mike
Oh. Try these...
https://youtu.be/bgKEZsiwfB0
https://youtu.be/jJDP88FGMns
https://uploads.tapatalk-cdn.com/201...c978e78393.jpg
My drives have arrived and I have wired up the power supply to them (see photo) any reason why I shouldn't power them up with nothing else connected ??
If it makes you happy Joe:beer:Quote:
My drives have arrived and I have wired up the power supply to them (see photo) any reason why I shouldn't power them up with nothing else connected ??