Yep, thats pretty much what i thought while i watched my new cutter get buried in the bed :)
I have a little less trust for it now but thats probably not a bad thing.
Printable View
Yep, thats pretty much what i thought while i watched my new cutter get buried in the bed :)
I have a little less trust for it now but thats probably not a bad thing.
OK I have mine sorted I use a Purelogic board for the router but I have a simple bob tagged off it for the probe this had 5V inputs pulled high. I had put a resistor in series with the input pin sometime ago and I had forgot about it. I measured the voltage on the probe plate, It was only about 3.3V so there was my problem it was just on the edge of working when I removed the resistor it measured 5V. Problem solved for me anyway.