carving issues-UNSOLVED

**phill05** · 10-10-2017

(probably why it doesnt work lol)

Ya could be right there, start with contacting Rhonmac.

Phill

**woodworker** · 10-10-2017

do you use Aspire yourself Phill? if you do would it be possible please for you to output me a simple file 100mm X 100mm project size and a pocket of 60mm X 60mm depth of 30mm tool size 8mm mill, that way I will be able to check if my software is working correctly. Thanks not to worry if you cant or dont use.

**phill05** · 10-10-2017

Yes mate on it now

**woodworker** · 10-10-2017

awesome thank you

**woodworker** · 10-10-2017

cheers Phill will let you know tomorrow

**woodworker** · 11-10-2017

Hi Phill
Same unfortunately the tap file cut ok for around 5 cuts then went left by approx 20mm (the bit doesn't like being shoved across a thick piece of wood) and the second file cut to the right approx the same at least I can rule out Aspire as the culprit, going to make a phone call me thinks.

**woodworker** · 11-10-2017

Solved turns out my Mach 3 copy is corrupt what did I expect as it came with my long dead Chinese laser machine so I now need to purchase a new Mach 3. Big thanks to Phill for going beyond the call really helped me nail down the issue.

**cropwell** · 11-10-2017

If you purchased a proper licence, then you should be able to download Mach3 and use the same licence. If the licence came with the Chinese laser, then it is probably a 'pirate' and the download won't work with it.