Plug for water cooled Chinese spindle

[John S]

Have you got them yet ?
Description is vague, you could be getting just 50 plugs

[Jonathan]

Have you got them yet ?
Description is vague, you could be getting just 50 plugs

Only ordered on the 15th, despatched on 17th so not yet.

Just used the online chat thing to check for you:



So it's fine - I'll let you know when they arrive if you want...

Good discount if you buy 100, I should have done that.

[John S]

They will also give you the discount if you buy 50 of one type and 50 of another. Just asked them and ordered 50 4 pin and 50 6 pin.

[Jonathan]

They will also give you the discount if you buy 50 of one type and 50 of another. Just asked them and ordered 50 4 pin and 50 6 pin.

Yea, I'll get some of the 20mm 4-pin version for steppers and maybe some more.

[John S]

Whats the type number for the 20mm ones ?

[Jonathan]

Whats the type number for the 20mm ones ?

SH-20

Discount if you buy 50 of those, so might just do that - group buy?

[John S]

Let me see if i can hold the order i have just placed and re-order.
PM you tonight.

[Jonathan]

Thanks.. just noticed there doesn't appear to be anywhere to connect the shielding, so I reckon get 5-pin instead.

[irving2008]

Shielding in line-socket is clamped under the cord grip
Shielding in chassis plug uses tag under mounting nut.

I have the eBay versions of these...

Unless you want shielding independent of chassis ground then you need the extra pin

[John S]

Yes managed to cancel the order but spotted another problem.
The multi pins I already have [ forget the high speed motor ] are opposite, the chassis sockets are female. If you use these GX16-4 or the 19-4' [ or 5's ] for stepper drives the pins, when connected, are live.

Can't seem to see the opposite version, must have a different designation but can't see what it is.