. .
Page 1 of 2 12 LastLast
  1. #1
    morning all
    i thought id throw this in here save me struggling with my poor aldi bench drill and hacksaw.
    what am i looking at to get some 8mm bar parted at 16mm lengths and an M5 Thread putting in, the threads not going through the length of it but going through the side centre/middle right through the 8mm dia. 100-200 peices.and most likely more after that
    i can get the stainless 8mm bar at a tenner a metre forwarded.ta

  2. #2
    Drop AdCNC a message. :-)

  3. #3
    Thanks dman,i,ll just leave it where it is and if anyone wants it they,ll get in touch ;)

  4. #4
    Sorry didn't want to single out one guy, reason being i use him for most of my work, so I can recommend him that's all. Probs should of explained it better :-p

  5. #5
    Quote Originally Posted by deisel View Post
    morning all
    i thought id throw this in here save me struggling with my poor aldi bench drill and hacksaw.
    what am i looking at to get some 8mm bar parted at 16mm lengths and an M5 Thread putting in, the threads not going through the length of it but going through the side centre/middle right through the 8mm dia. 100-200 peices.and most likely more after that
    i can get the stainless 8mm bar at a tenner a metre forwarded.ta
    Hi Deisel, I have just seen your RFQ, are you still looking for quotes? Regards

  6. #6
    How soon would you need them?

    Quote Originally Posted by deisel View Post
    i can get the stainless 8mm bar at a tenner a metre forwarded.ta
    Sounds expensive - I can get it for £2.62 per meter.
    Old router build log here. New router build log here. Lathe build log here.
    Electric motorbike project here.

  7. #7
    bloody el that is cheap,

  8. #8
    Wouldn't it be cheaper to just buy them rather than get someone to make them or am I missing something?
    You can buy m5 barrel nuts at 16mm long in both stainless & alloy.

  9. #9
    Quote Originally Posted by martin54 View Post
    Wouldn't it be cheaper to just buy them rather than get someone to make them or am I missing something?
    You can buy m5 barrel nuts at 16mm long in both stainless & alloy.
    thanks martin i feel like a prize one, id given up searching for the things but it does help when you know the appropriate name for them,id typed everything from cam lock pins to..
    ,ive found a match on ebay but there in zinc,i,ll keep looking for the stainless,thanks lad

  10. #10
    Quote Originally Posted by deisel View Post
    thanks martin i feel like a prize one, id given up searching for the things but it does help when you know the appropriate name for them,id typed everything from cam lock pins to..
    ,ive found a match on ebay but there in zinc,i,ll keep looking for the stainless,thanks lad
    Hi Deisel, I'll do them for £0.75 each, regards Gary

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FOR SALE: 16mm round rail, bearings and clamps - 300mm long
    By Tenson in forum Items For Sale
    Replies: 0
    Last Post: 25-01-2014, 12:43 AM
  2. Maximum length guideline for a standard 16mm ballscrew?
    By WandrinAndy in forum Lead Screws, Nuts & Supports
    Replies: 5
    Last Post: 01-11-2012, 12:27 AM
  3. WANTED: 2 x 20/16mm supported round rail
    By D-man in forum Items Wanted
    Replies: 4
    Last Post: 30-10-2011, 11:08 PM
  4. Ports and pins help ? mach 3
    By xchipx in forum Artsoft Mach (3 & 4)
    Replies: 0
    Last Post: 19-04-2009, 12:45 PM
  5. 16mm supported rail how many linear bearings
    By progomez in forum Rails, Guideways & Bearings
    Replies: 13
    Last Post: 15-01-2009, 09:39 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •