Thread: Hi everyone

  1. #1
    Hi to everyone just started to build my first CNC machine look forward to sharing the good and the bad times

    Most importantly picking your brains

  2. #2
    Hi welcome to the forum.
    The first rule is don't but any electrical kit.
    Read some build logs, then knock up a design and offer it up for comments of the guys,let us know your intended application and required cutting area ect.
    Enjoy
    Mike

  3. #3
    Welcome as Mike says read the build logs, start a build thread and enjoy the ride!!!
    Neil...

    Build log...here

  4. #4
    Quote Originally Posted by mekanik View Post
    Hi welcome to the forum.
    The first rule is don't but any electrical kit.
    Read some build logs, then knock up a design and offer it up for comments of the guys,let us know your intended application and required cutting area ect.
    Enjoy
    Mike
    Hi Mike and thanks for the welcome already a rebel and have bought the electronics which I was sorting out last night I will add some pictures to the build log area shortly

    Thanks Steve

  5. #5
    Quote Originally Posted by njhussey View Post
    Welcome as Mike says read the build logs, start a build thread and enjoy the ride!!!
    Does it take time for a new thread to show on the site ?

  6. #6
    I think that to start off threads have to be approved by a moderator if you've not many posts but not too sure....Lee's your man as it's his site...
    Neil...

    Build log...here

  7. #7
    Quote Originally Posted by njhussey View Post
    I think that to start off threads have to be approved by a moderator if you've not many posts but not too sure....Lee's your man as it's his site...
    Thanks Neil

    Thought I was losing the plot !

  8. #8
    Yep losing the plot had another go it worked this time.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •