Thread: Truck axel

  1. #1
    Hi do not know if it's the right place but I had fun shrink a trailer axle which had been off the road

    Skickas från min iPad via Tapatalk

  2. #2
    How much bend was there to start with? Did it straighten out completely?

  3. #3
    It was bent like a banana z axis of about 45 mm and the Y axis of about 30mm. Now is it about 2.7 in the z and y 3.3 on the end of the spindle
    I have mount the axel and there are adjustments to the spring legs or whatever it's called in English. So I hope it will be enough I measure it in the old way with plum. for I have not laser measuring They will take it to a repair shop and enter the correct

    Skickas från min iPad via Tapatalk
    Last edited by fernballan; 08-09-2016 at 03:48 AM.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts