Thread: Evening All

Page 1 of 4 123 ... LastLast
  1. Hi All,

    I'll be honest I'm not very good at this sell yourself bit but here goes..

    I'm Rich from Newcastle and well I stumbled upon your site tonight and thought I would come over and see if I could pick some peoples brains on the cnc side of things and maybe offer some help on the PC side of things.

    I've been a cnc newbie for years with my little Roland PNC2300A until now when I'm ready to join the big boys with a new OXCNC machine in a week or 2 (unless I'm warned off??).

    Anyway, thanks for having me and hope to get to know a few of you as we go.

  2. #2
    Hi Rich,

    Welcome to the forum! There's plenty of experienced CNC'ers on here (I don't claim to be one of them by the way!!) for you to pick the brains of. There's no such thing as a silly question, the only silly question is the one you don't ask!! The OXCNC might be OK for you, but depends on what you want to do with it as it's not the stiffest machine in the world
    Neil...

    Build log...here


  3. Thats the one Robin, I was looking at the 1500mm*1500mm version and was going to drop a dewalt unit in it.

  4. Quote Originally Posted by njhussey View Post
    Hi Rich,

    Welcome to the forum! There's plenty of experienced CNC'ers on here (I don't claim to be one of them by the way!!) for you to pick the brains of. There's no such thing as a silly question, the only silly question is the one you don't ask!! The OXCNC might be OK for you, but depends on what you want to do with it as it's not the stiffest machine in the world
    Thanks Neil, one question I do have is could you tell me please. How long does the post moderation lasts for ?

  5. Yeah thats the one Robin, 1500mm*1500mm with plans to stick the dewalt router on it.

  6. Quote Originally Posted by njhussey View Post
    Hi Rich,

    Welcome to the forum! There's plenty of experienced CNC'ers on here (I don't claim to be one of them by the way!!) for you to pick the brains of. There's no such thing as a silly question, the only silly question is the one you don't ask!! The OXCNC might be OK for you, but depends on what you want to do with it as it's not the stiffest machine in the world
    Hi Neil, I was looking at using it to do some flat pack builds (arcade cabinets etc..) and some house name plate/signs and maybe some arty stuff too.

    Do you think it would be up to the job?

  7. #8
    Quote Originally Posted by Chimestrike View Post
    (unless I'm warned off??).
    Be afraid Very Afraid.!!! . . . . . . Weak and flimsy and poorly designed. Save the money and DIY build something proper.!

  8. Thanks Jazzcnc,

    Any recomendations for less than 1500?

  9. Quote Originally Posted by Chimestrike View Post
    Any recomendations for less than 1500?
    I have a serious feeling of deja vu on this thread - I think the next post will be 'Double your budget !'

    Rob.
    It takes all sorts to make a world, I am just glad I am not one of them.

Page 1 of 4 123 ... LastLast

Similar Threads

  1. NEW MEMBER: Evening All from Aylesbury
    By RocketBoy in forum New Member Introductions
    Replies: 0
    Last Post: 19-06-2016, 08:50 PM
  2. NEW MEMBER: Evening all
    By 9designs in forum New Member Introductions
    Replies: 6
    Last Post: 25-11-2014, 05:52 AM
  3. NEW MEMBER: Good evening all.
    By monza in forum New Member Introductions
    Replies: 2
    Last Post: 28-12-2009, 07:53 PM
  4. NEW MEMBER: Good evening.
    By itbookham in forum New Member Introductions
    Replies: 1
    Last Post: 18-11-2009, 07:46 PM
  5. NEW MEMBER: Evening all.....
    By HiltonSteve in forum New Member Introductions
    Replies: 9
    Last Post: 14-05-2009, 01:40 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •