DDSCV1.1 3 and 4 axis offline motion controller

[Boyan Silyavski]

HI,

After being looking at various controllers at the end i decided to test some of the offline ones. Started with one of the cheap ones. As you can imagine it would be great to forget about Windows if possible. So i decided to overview it "officially" here, hopefully sb could find that helpful.


DDSCV1.1, 3 and 4 axis. / note that in the 3 axis version you can not change any axis to rotational , but the 4rth axis variant, has a rotational axis option for A/



Mistakenly bought the 3 axis version / if sb wants that one , PM me/ . I have read the MANUAl from page one to end very carefully and apart from some small questions all looks well.

And yes, i will connect my 2 long axis to one of the controller axis or just one of them and control the other from the servo itself . Will see about that.

Here was the most extensive info in English i found till now




OK. So it arrived.

-Price paid 165$ for the 3 axis version
-nicely packed
-looks nice


According to me if one knows what he is doing it could be a perfectly self sufficient control for great price. It has spindle control, probing, software limits, separate axis homing, separate axis zeroing, etc.




Instead of writing novels, i made a video overview of it:

Part one, ~20 min introduction, basic functions and settings





Part 2, running program test




Prt 3 / still to film, when i have more time will set it on my big machine, connect all and see how it moves, homes and so on in real life, otherwise all above is pointless/