Thread: LED Spindle Light
I bought myself a pair of these Angel Eyes the other week.
I had to upgrade my 12V PS as the 2A supply was starting to struggle (I'm running my spindle water cooling pump off the same supply). Plenty of sizes available, but the 10CM ring fits around my Chinese 2.2KW water-cooled spindle nicely.
Looks good, stays out of the way and illuminates the work area well - the nose of the spindle does cast a bit of a shadow on where the tool touches the workpiece, but my eyesight hasn't quite deteriorated enough for this to be a problem...
The Following User Says Thank You to Wal For This Useful Post:
Nice one Wal,
Thanks, I'll give that a go,
- NickIf you will not be swayed by logic or experience simply pick the idea you
like best, but ask yourself why you sought advice in the first place and,
for a simple life, perhaps consider not doing so in future
By Washout in forum Workshop & EquipmentReplies: 2Last Post: 06-04-2016, 06:57 PM
By Doddy in forum Items WantedReplies: 1Last Post: 31-03-2016, 05:24 PM
By mekanik in forum Workshop & EquipmentReplies: 17Last Post: 24-02-2016, 06:58 PM
By pierantoine in forum Rails, Guideways & BearingsReplies: 2Last Post: 01-01-2016, 05:13 PM
NEW MEMBER: Total Newbie....looking for the light....By MOCNC in forum New Member IntroductionsReplies: 2Last Post: 01-07-2014, 09:37 PM