Im trying to plan the building of a Cnc wire bending machine.
I'd like to build it using arduino, with stepper motor drivers and stepper motors. I could need 4 stepper motors.
I have no problems with mechanical side of things but I've never built a Cnc machine before.
I have used Cnc wire edm, Cnc milling machines, and 3d printers, I have some experience of directly inputting g code, but normally used a post processor.
Could anyone recommend software to run the machine.
Would I be better buying a kit from this site https://www.cnc4you.co.uk/CNC-Kits/Digital-Stepper-Kits
Thanks for any help or guidance.
Why don't you just follow the instructions on the DiWire and start from there?
Would that be 3d or 2d?
Any 4 axis capable breakout board or a motion control could move 4 motors , from 10$ to 1000$. To narrow down, you will need to specify how many if any additional inputs, outputs? Way of communication? Programmable, offline, windows, linux, Mach3? etc.
But the way i see it, the cornerstone here will be: "who and how will translate 3d shapes to G code?"
If you could write your G code, or brake the shape into different parts each on its own plane and then combine...
If you would like to make a commercial machine for resale , your best bet is to write or pay sb to write a program that translates the shapes in G code for your machine. It should not be sth very complicated. At Freelancer i think for 500-100$ sb could do that for you.
But your best bet is to start from sth existing and build upon it- DiWire
NEW MEMBER: NEW MEMBER: advice on wire formingBy A_yates in forum New Member IntroductionsReplies: 7Last Post: 21-09-2016, 08:58 AM
NEW MEMBER: Not building buying a machineBy theceo in forum New Member IntroductionsReplies: 1Last Post: 31-03-2016, 07:12 PM
By komatias in forum Items For SaleReplies: 4Last Post: 05-06-2015, 09:10 AM
By Timo in forum Gantry/Router Machines & BuildingReplies: 6Last Post: 10-06-2014, 03:10 AM
NEW MEMBER: CNC and other Machine Building BerlinBy Andikid in forum New Member IntroductionsReplies: 1Last Post: 07-10-2010, 11:30 PM