Page 2 of 7 FirstFirst 1234 ... LastLast
  1. #11
    Wal's Avatar
    Lives in Stockport, United Kingdom. Last Activity: 6 Hours Ago Has been a member for 5-6 years. Has a total post count of 296. Received thanks 27 times, giving thanks to others 11 times.
    Cheers Chris,

    Not sure I could bring all that much to the party body and neck wise, but maybe inlays, or a badge of some sort? Perhaps the pick-ups? I mention those as I'm currently making a set of 10 prototype Rosewood P90's for a local builder, pics and vid of an earlier effort below. I could always ask if he'd wind you a custom built set if you wanted to go off the beaten track - might be a bit cheeky but he's going to be dabbling in CNC himself at some point next year - I've already had the thought that you might make a good contact for him regarding learning about the machine and a solid introduction to CNC guitar making...

    Click image for larger version. 

Name:	tumblr_odd6gdPnWt1r7uds7o2_1280.jpg 
Views:	77 
Size:	89.5 KB 
ID:	19347Click image for larger version. 

Name:	tumblr_odd6gdPnWt1r7uds7o3_1280.jpg 
Views:	83 
Size:	99.7 KB 
ID:	19348



    Wal.

  2. #12
    Washout's Avatar
    Lives in Bewdley, Worcs, United Kingdom. Last Activity: 16 Hours Ago Has been a member for 5-6 years. Has a total post count of 416. Received thanks 25 times, giving thanks to others 65 times. Made a monetary donation to the upkeep of the community.
    Hi Wal,

    That might be an idea - I was going to go with some kind of vintage Fender reissue pickup in the bridge (the original guitar I'm copying is a '62) and a '57 PAF re-issue in the neck, but if I can get closer to "vintage" by going custom that might be worthwhile.

    No problems on me helping your mate out with guitar CNC'ing - I try to respond to any questions on my YouTube channel the day they're posted and get some PM's etc as well - happy to help people get inspired to build/buy/learn CNC.

    Cheers


    Chris
    Last edited by Washout; 27-09-2016 at 01:59 PM.

  3. #13
    Washout's Avatar
    Lives in Bewdley, Worcs, United Kingdom. Last Activity: 16 Hours Ago Has been a member for 5-6 years. Has a total post count of 416. Received thanks 25 times, giving thanks to others 65 times. Made a monetary donation to the upkeep of the community.
    First of the videos for this project - intro and CAd for the neck in Fusion 360:



    I have also done most of the CAM apart from working out final workholding and indexing for the doublesided nature. For those with access to the model - have a look and see what you think.

  4. #14
    Bugger.....been meaning to start up Fusion but life (grandson most recently) keeps getting in the way....myst try harder (sounds like my school reports!!!) sorry Chris........

    Sent from my HUAWEI VNS-L31 using Tapatalk
    Neil...

    Build log...here

  5. #15
    Washout's Avatar
    Lives in Bewdley, Worcs, United Kingdom. Last Activity: 16 Hours Ago Has been a member for 5-6 years. Has a total post count of 416. Received thanks 25 times, giving thanks to others 65 times. Made a monetary donation to the upkeep of the community.
    No worries Neil,

    I'll be starting on the body soon, but there will be two versions - one with the standard single coils and then the Andy Summers variant, with the extra routing plus humbucker.

  6. #16
    Wal's Avatar
    Lives in Stockport, United Kingdom. Last Activity: 6 Hours Ago Has been a member for 5-6 years. Has a total post count of 296. Received thanks 27 times, giving thanks to others 11 times.
    Looking good Chris..! Very neat bit of modelling there.

    Wal.

  7. #17
    Washout's Avatar
    Lives in Bewdley, Worcs, United Kingdom. Last Activity: 16 Hours Ago Has been a member for 5-6 years. Has a total post count of 416. Received thanks 25 times, giving thanks to others 65 times. Made a monetary donation to the upkeep of the community.
    Thanks Wal

    I should have the CAM video up soon, but have a cockpit project vid before that and I got an Oculus Rift a couple of weeks ago and that has been keeping me "immersed".

  8. #18
    Washout's Avatar
    Lives in Bewdley, Worcs, United Kingdom. Last Activity: 16 Hours Ago Has been a member for 5-6 years. Has a total post count of 416. Received thanks 25 times, giving thanks to others 65 times. Made a monetary donation to the upkeep of the community.
    Video showing the CAM process fro the neck is up:



    @Neil and Lee - I haven't tested the toolpaths yet, so beware.

  9. #19
    Washout's Avatar
    Lives in Bewdley, Worcs, United Kingdom. Last Activity: 16 Hours Ago Has been a member for 5-6 years. Has a total post count of 416. Received thanks 25 times, giving thanks to others 65 times. Made a monetary donation to the upkeep of the community.
    Merry Christmas all,

    I got some time on the machine and for video editing. Here is the test machining and I'm glad I did this as there were a couple of issues (for the next video) that needed solving before machining in real wood:


  10. #20
    Washout's Avatar
    Lives in Bewdley, Worcs, United Kingdom. Last Activity: 16 Hours Ago Has been a member for 5-6 years. Has a total post count of 416. Received thanks 25 times, giving thanks to others 65 times. Made a monetary donation to the upkeep of the community.
    Next part of the build - fixing a CAD problem in Fusion 360 and then cutting it out in maple:


Page 2 of 7 FirstFirst 1234 ... LastLast

Similar Threads

  1. FOR SALE: CNC project
    By amxen in forum Items For Sale
    Replies: 1
    Last Post: 20-12-2015, 08:19 PM
  2. NEW MEMBER: Hello My CNC UK community
    By Xavi in forum New Member Introductions
    Replies: 2
    Last Post: 30-11-2015, 08:01 PM
  3. Community Shed
    By Musht in forum General Discussion
    Replies: 12
    Last Post: 06-10-2013, 11:15 AM
  4. Central South Community
    By Leadhead in forum General Discussion
    Replies: 1
    Last Post: 26-09-2011, 01:50 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •