Thread: Instrument maker
Threaded View
-
06-10-2016 #9
It means you will start cutting fast, then lower speeds when you encounter problems. It also means sometimes instead of profiling, you will have to pocket some extra pockets, so as the rests from wood not to obstruct the vacuum shoe, or chip when they fly away. Meaning last pass should be carefull and well thought. / Lastpass is when you cut off the detail/ . As i said experimenting should be done with each material for optimum results.
Thats the spirit
Forget about that
Its not the machine that makes the noise. Its virtually silent with the water cooled spindle. you can not hear it if you are doing sth small. Its the bit in the wood that makes the noise. A big noise. No windows open. For home scenario, you need a to make an enclosure. And if you have neighbours touching from one side, forget about that too. Even the frequent vacuum cleaning will make them crazy.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Model Engineer Exhibition & Maker Show @ Sandown Park
By ModelEngineer in forum General DiscussionReplies: 0Last Post: 19-11-2013, 03:53 PM -
NEW MEMBER: JoeCNC, from Ireland, cabinet maker.
By JoeCNC in forum New Member IntroductionsReplies: 6Last Post: 21-09-2013, 11:24 PM -
NEW MEMBER: IT/Sign Maker/Geek
By daverowland in forum New Member IntroductionsReplies: 2Last Post: 12-07-2012, 10:07 PM -
Cnc Code Maker - 2D CAD/CAM
By CncCodeMaker in forum Programmers CornerReplies: 11Last Post: 18-04-2010, 09:31 PM
Bookmarks