1. #1
    Anyone viewing this will be familiar with the quality of these units, as good as Wadkin at a fraction of the cost. Surplus to requirements now so must go to a good home. There are 4 spindles altogether, one mounted on the frame, 2 others in working order and one spare, might be of use. There are a spare set of carbon brushes in one of the spindles in a housing to hold spare brushes.
    Spanners, collets and router pins to get you started. As you can see there is also a spare spindle holder and router bed. If you are clever enough there are almost enough parts here to get 2 complete routers for the price of 1.
    Collection only but buyer can arrange courier at their own cost or if new owner is East Midlands area I might be able to arrange delivery at a reasonable rate. Call me on 07931704047 to discuss this further. Feel free to try it out before purchase. In case you don't know on the top of the spindle you can turn a big dial to make micro adjustments in the Z axis, very useful.



    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_1696.JPG 
Views:	33 
Size:	1.16 MB 
ID:	19441   Click image for larger version. 

Name:	fullsizeoutput_3143.jpg 
Views:	37 
Size:	217.5 KB 
ID:	19442   Click image for larger version. 

Name:	fullsizeoutput_3142.jpg 
Views:	36 
Size:	210.2 KB 
ID:	19443   Click image for larger version. 

Name:	fullsizeoutput_3144.jpg 
Views:	37 
Size:	318.3 KB 
ID:	19444   Click image for larger version. 

Name:	fullsizeoutput_3145.jpg 
Views:	37 
Size:	247.8 KB 
ID:	19445   Click image for larger version. 

Name:	fullsizeoutput_3146.jpg 
Views:	35 
Size:	270.1 KB 
ID:	19446   Click image for larger version. 

Name:	fullsizeoutput_3147.jpg 
Views:	39 
Size:	313.6 KB 
ID:	19447   Click image for larger version. 

Name:	fullsizeoutput_3148.jpg 
Views:	36 
Size:	185.4 KB 
ID:	19448   Click image for larger version. 

Name:	IMG_1705.JPG 
Views:	35 
Size:	617.5 KB 
ID:	19449   Click image for larger version. 

Name:	IMG_1706.JPG 
Views:	36 
Size:	681.5 KB 
ID:	19450  

    Click image for larger version. 

Name:	IMG_1707.JPG 
Views:	51 
Size:	689.1 KB 
ID:	19451  
    Last edited by rainboweyes; 14-10-2016 at 10:34 PM.

Similar Threads

  1. single and 3 phase motor sizing and mounting ?
    By Musht in forum General Electronics
    Replies: 5
    Last Post: 27-10-2013, 09:58 PM
  2. Big single phase servos and drivers
    By m_c in forum Stepper & Servo Motors
    Replies: 0
    Last Post: 04-09-2013, 01:18 AM
  3. Replies: 19
    Last Post: 21-08-2013, 11:20 PM
  4. convert 3 phase to single phase?
    By D-man in forum General Electronics
    Replies: 10
    Last Post: 06-04-2013, 12:16 AM
  5. Running a three phase router/mill on a generator?
    By gavztheouch in forum General Electronics
    Replies: 3
    Last Post: 19-02-2013, 12:39 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •