Dear Mr Chime.
This is the cheapest way you will get.
First off find a PC running XP that has a parallel port, install Mach 3.
Then buy a breakout board like the one you linked to but this one is far cheaper.
Then buy 4 of these/
You only need 3 but buying a 4th means you never have to wait if it breaks down.
So for a total of a SH computer, and £21.14 you will have everything to convert your machine if you use the existing steppers and power supply out of the Roland.
Both these Ebay links are from the same seller BTWJohn S -
Thanks John, I think that is going to be the way forward on it as everything else is already on the machine.
I think some bits will be trial and error but lets see where it goes.
Thanks for the help
Although it is the simplest option you aren't strictly limited to Windows XP, I'm currently running Mach3 on an HP dc7800 pc on Windows 7 without issues, I had to add aftermarket sound and video cards as the on board chipsets were not supported under Windows 7,
- NickIf you will not be swayed by logic or experience simply pick the idea you
like best, but ask yourself why you sought advice in the first place and,
for a simple life, perhaps consider not doing so in future
Looks like fate has taken control of this guys and after a failed firmware update the Roland board is not booting.....oh well mach3 it is :)
WANTED: Roland MDX-40 or 40A or SRM-20By o_drew in forum Items WantedReplies: 0Last Post: 25-11-2015, 06:41 PM
SOLD: Roland MDX-40 £2,000By m_christopher in forum Items For SaleReplies: 0Last Post: 22-05-2015, 11:38 AM
FOR SALE: Roland engraversBy Bartell in forum Items For SaleReplies: 3Last Post: 11-12-2014, 11:09 AM
By iampete in forum Gantry/Router Machines & BuildingReplies: 0Last Post: 01-09-2014, 03:17 PM
By Lee Roberts in forum Items On eBay UKReplies: 0Last Post: 09-01-2014, 10:41 AM