Thread: Optical measuring device
-
05-11-2016 #1
Hi,
Does anyone know where this device is used? The two lines moves across the lense when I turn the wheel.
Brian.Last edited by CNCDev; 05-11-2016 at 02:02 PM.
-
05-11-2016 #2
Its off a Russian cruise missile
John S -
-
05-11-2016 #3
I thought it was to find Deans small odds and ends
Last edited by Clive S; 05-11-2016 at 05:40 PM.
..Clive
The more you know, The better you know, How little you know
-
05-11-2016 #4
-
05-11-2016 #5
There are obviously several small things it can measure... ;-) On another website I was told that it is used for setting tool offsets, which also makes sense.
Brian.
-
06-11-2016 #6
It looks like it's used as described on other website,it measures a linear offset, clamped to one jobby after rough alignment with the indexing arm and the offset of whatever read off the indicator dial after the target has been aligned.
Perhaps.
Mike
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Measuring impact gun torque?
By m_c in forum General DiscussionReplies: 9Last Post: 16-06-2016, 08:49 PM -
Hair growth device. DIY version
By gavztheouch in forum Electronic Project BuildingReplies: 16Last Post: 30-03-2014, 08:55 PM -
BOB 3 Axis, optical isolation
By thjremy in forum Electronic Project BuildingReplies: 7Last Post: 05-01-2014, 04:15 PM -
optical encoders for stepper motors
By lateAtNight in forum Stepper & Servo MotorsReplies: 2Last Post: 21-06-2009, 12:54 PM -
Measuring Spindle Runout
By Lee Roberts in forum Spindles & Drive MotorsReplies: 0Last Post: 18-10-2008, 11:47 PM
Bookmarks