So, after a bit negotiation, this got dropped outside the workshop a few weeks ago -

I'd been looking for one for a while, and this one ticked most of the boxes (enclosed, coolant, ATC, autolube). My only complaint is it's a BT35 taper, however it also came with this-

Which should be enough holders to keep me going for a while. I have possibly found a source for new holders, however I'm weighing up the options between buying new holders, or converting it to BT30.

One thing I do have to mention, is a set of machine skates has got to be one of the best things I've built. Made rolling it into place very easy -


I'll gradually add to this thread, but at the current moment, the machine is still partially dismantled, mostly cleaned, and the old controller stripped from the cabinet.