Page 3 of 3 FirstFirst 123
  1. #21
    Quote Originally Posted by magicniner View Post
    Damn this reply box behaviour, now it's recognising spaces but if I insert them higher up the reply it parses them as line feeds and initially ignored them entirely!

    - Nick
    Nick it has happened to me with Chrome I have already sent Lee a PM to let him know that it has reoccurred
    ..Clive

  2. #22
    Quote Originally Posted by magicniner View Post
    Yes,_check_the_PSU_output_with_the_pins_shorted_th en_remove_shorting_pin,_disconnect_mains_and_conne ct._Then_test.

    Damn this reply box behaviour, now it's recognising spaces but if I insert them higher up the reply it parses them as line feeds and initially ignored them entirely!

    - Nick
    All wired up, voltages are good BUT we dont have a white wire (-5v) on the new psu, which we did have on the old one??

  3. #23
    If your PSU doesn't have all the right voltages it isn't the right PSU for the job, you could add a separate -5v fairly easily, but have you asked the manufacturer how much for the correct PSU for the job?
    If you will not be swayed by logic or experience simply pick the idea you
    like best, but ask yourself why you sought advice in the first place and,
    for a simple life, perhaps consider not doing so in future

  4. #24
    Quote Originally Posted by jackpat View Post
    All wired up, voltages are good BUT we dont have a white wire (-5v) on the new psu, which we did have on the old one??
    I think you need one of the older type ie AT not ATX http://www.ebay.co.uk/itm/AT-PSU-WOR...-/142163387623

    see this at the bottom of the page https://en.wikipedia.org/wiki/Power_...nit_(computer)
    Last edited by Clive S; 17-11-2016 at 01:23 PM.
    ..Clive

  5. #25
    Quote Originally Posted by Clive S View Post
    I think you need one of the older type ie AT not ATX http://www.ebay.co.uk/itm/AT-PSU-WOR...-/142163387623

    see this at the bottom of the page https://en.wikipedia.org/wiki/Power_...nit_(computer)
    I've pulled a power supply out of an old computer we have lying around, and ive managed to get it wired in. Now when i turn the m/c on the screen is coming up all stripey with a bunch of random symbols/ letters on it. Video card maybe??

  6. #26
    Either the video card, or the video card is getting junk data.
    You're probably better speaking to your board repairers, as now you know what the main problem was, and the machine is now doing something, it may help them track down what has been damaged.
    Avoiding the rubbish customer service from AluminiumWarehouse since July '13.

  7. #27
    Quote Originally Posted by m_c View Post
    Either the video card, or the video card is getting junk data.
    You're probably better speaking to your board repairers, as now you know what the main problem was, and the machine is now doing something, it may help them track down what has been damaged.
    Just spoken with haas, they thought the processor might have dropped it's guts :( it was only out of the m/c for about of a day and we kept the battery attached though?

  8. #28
    Quote Originally Posted by jackpat View Post
    I've pulled a power supply out of an old computer we have lying around, and ive managed to get it wired in. Now when i turn the m/c on the screen is coming up all stripey with a bunch of random symbols/ letters on it. Video card maybe??
    I don't know the machine at all but if and only if it has a dumb monitor ie RS-232 it could be board rate set wrong with showing random symbols. If its a VGA type I take it you have unplugged the monitor and card and refitted.
    ..Clive

  9. #29
    Quote Originally Posted by Clive S View Post
    I don't know the machine at all but if and only if it has a dumb monitor ie RS-232 it could be board rate set wrong with showing random symbols. If its a VGA type I take it you have unplugged the monitor and card and refitted.
    Yep i've unplugged & refitted. Any thing else i can check??

  10. #30
    Have you tried asking over on Practical Machinist forum?
    If you're going find somebody online who knows about these machines, then that's the place you're likely to find them.
    Avoiding the rubbish customer service from AluminiumWarehouse since July '13.

Page 3 of 3 FirstFirst 123

Similar Threads

  1. Haas Hl2 lathe assitance S70 area
    By MAW in forum Lathes, Lathe Rebuilding & Conversions
    Replies: 2
    Last Post: 05-09-2016, 07:09 AM
  2. Haas mini mill spindle ramp up time
    By Hellfire in forum Machine Discussion
    Replies: 2
    Last Post: 16-05-2016, 09:33 AM
  3. Haas vf-0e 1995
    By jackpat in forum Machine Discussion
    Replies: 0
    Last Post: 13-05-2016, 10:18 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •