. .
Page 1 of 3 123 LastLast
  1. #1
    Ok Boyan thrown some motors on controller and CANNOT make it Slave the motors together. changed all settings and still no Joy.
    The A/B selection makes no difference. Setting A pulse to from Pulse/Deg to Pulse/Circ just makes the A motor ONLY spin continuesly with no control over it. Pulse Degree does exactly that moves in Degree increments per pulse.

    I'm also not impressed with the Crap Terminal connectors on back what load of rubbish. Tiny holes and half of them won't clamp properly. I see loads of potential for trouble with lose or fallen out wires with these things.!!

  2. The Following User Says Thank You to JAZZCNC For This Useful Post:


  3. #2
    Quote Originally Posted by JAZZCNC View Post

    I'm also not impressed with the Crap Terminal connectors on back what load of rubbish. Tiny holes and half of them won't clamp properly. I see loads of potential for trouble with lose or fallen out wires with these things.!!

    Clumsy fat fingered bastard.
    John S -

  4. #3
    Quote Originally Posted by John S View Post
    Clumsy fat fingered bastard.
    Yes but I can lose weight but you'll always be Ugly Old Git.

  5. #4
    Quote Originally Posted by JAZZCNC View Post
    Yes but I can lose weight :
    About the same time Mach 4 is reliable, so I have no worries and me favourite Rocket Scientist seems quite happy :-)
    John S -

  6. #5
    Originally Posted by John S
    Clumsy fat fingered bastard.

    Yes but I can lose weight but you'll always be Ugly Old Git.

    About the same time Mach 4 is reliable, so I have no worries and me favourite Rocket Scientist seems quite happy :-)


    John S -


    Go on John - swing yer 'andbag at 'im.

  7. #6
    See Phantom Post deleter strikes again.!! . . . . . Surely were all adults capable of seeing it's Mates having laugh at each others expense and no one elses.? . . . Cmon stop this needless censorship.

  8. The Following User Says Thank You to JAZZCNC For This Useful Post:


  9. #7
    m_c's Avatar
    Lives in East Lothian, United Kingdom. Last Activity: 2 Days Ago Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 2,908. Received thanks 360 times, giving thanks to others 8 times.
    Quote Originally Posted by JAZZCNC View Post
    See Phantom Post deleter strikes again.!! . . . . . Surely were all adults capable of seeing it's Mates having laugh at each others expense and no one elses.? . . . Cmon stop this needless censorship.
    And just when I thought it was safe to post things without people getting annoyed by moderation yet again.
    I think my latest retro thread might be getting continued elsewhere.
    Avoiding the rubbish customer service from AluminiumWarehouse since July '13.

  10. #8
    Quote Originally Posted by JAZZCNC View Post
    See Phantom Post deleter strikes again.!! . . . . . Surely were all adults capable of seeing it's Mates having laugh at each others expense and no one elses.? . . . Cmon stop this needless censorship.
    Knowing what you and John are like I saw the posts and smiled. ;-)

    - Nick
    You think that's too expensive? You're not a Model Engineer are you? :D

  11. #9
    m_c's Avatar
    Lives in East Lothian, United Kingdom. Last Activity: 2 Days Ago Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 2,908. Received thanks 360 times, giving thanks to others 8 times.
    Quote Originally Posted by magicniner View Post
    Knowing what you and John are like I saw the posts and smiled. ;-)

    - Nick
    I wasn't quick enough to see the posts, but I did get the emails with the posts' content.
    Can't beat a bit good banter ;-)

    I wonder if PMs are still being "monitored" as well...
    Avoiding the rubbish customer service from AluminiumWarehouse since July '13.

  12. #10
    Quote Originally Posted by m_c View Post
    I wasn't quick enough to see the posts, but I did get the emails with the posts' content.
    Can't beat a bit good banter ;-)

    I wonder if PMs are still being "monitored" as well...
    Send me one saying I'm a clueless wakner and see if it gets pulled :P
    You think that's too expensive? You're not a Model Engineer are you? :D

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. EXPERIENCE: Huge Thanks to Jazz
    By alboy in forum Trading Experience & Feedback
    Replies: 0
    Last Post: 22-09-2015, 10:24 AM
  2. Jazz you out there ?
    By John S in forum General Discussion
    Replies: 4
    Last Post: 12-10-2013, 06:24 PM
  3. BUILD LOG: Fingers crossed it'll cut ally
    By blackburn mark in forum DIY Router Build Logs
    Replies: 217
    Last Post: 24-04-2013, 08:55 PM
  4. My first ugly CNC.
    By mkcnc in forum Gantry/Router Machines & Building
    Replies: 0
    Last Post: 29-01-2011, 07:04 PM
  5. Please request ugly
    By ali hedi in forum Machine Discussion
    Replies: 4
    Last Post: 22-09-2010, 11:13 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •