1. #1
    Hi
    I am a newbie to this forum and forgive me if this question as already be asked.

    I am looking at purchasing ballscrews rails etc from rattmmotor101 on Ebay. Does any member have experience of this seller?
    Last edited by Lee Roberts; 22-11-2016 at 06:41 PM. Reason: Added link to ebay, edited title

  2. #2
    Sorry dosn't ring any bell's and been on here quite awhile.

    We typically recommend buying from BST Automation and/or linearmotionbearings for your machine components, I've used both and gave 10/10 all round at the time.
    .Me

  3. #3
    I would be careful about advertisers who say EU stock. They are more than probably Chinese companies with a small warehouse in UK. They will have to order from China anyway. Look at his feedback and the number of transactions. This looks to me that it is one of those traders that walks away from an account they have let go bad and starts again under a new account. I would be wary if I were thinking of ordering here.

    You may get your money back if it all goes belly up, but you will have wasted weeks.

    The traders Lee recommends are known, trusted and helpful.

    Cheers,

    Rob

    (just down the A46 !)
    Albert Einstein may have been a genius, but his brother Frank, was a monster

    Having just moved to Windows 10 (which is crap) My stress levels are through the roof !!!

  4. #4
    Thanks guys I will look into the suggested sites.
    Malc

Similar Threads

  1. BUILD LOG: a Steel Box Section Build with SBR20 & Ballscrews Plus a few questions
    By grain_r in forum DIY Router Build Logs
    Replies: 90
    Last Post: 09-11-2017, 08:03 AM
  2. Purchasing new parts for new build.
    By samsagaz in forum Gantry/Router Machines & Building
    Replies: 41
    Last Post: 14-06-2016, 07:11 PM
  3. Metal Stock Purchasing UK
    By paul_m in forum Metalwork Discussion
    Replies: 7
    Last Post: 25-05-2015, 03:42 PM
  4. new build - Rails & ballscrews & motors
    By CNCBlug in forum Linear & Rotary Motion
    Replies: 9
    Last Post: 11-12-2009, 04:16 PM
  5. Purchasing a z-axis?
    By lateAtNight in forum Gantry/Router Machines & Building
    Replies: 24
    Last Post: 27-01-2009, 07:24 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •