Tank3d printer build

[Boyan Silyavski]

What i am looking is a thermal fuse, which apart the thermal protection, has Amp rating. So i thought before that i need 2 separate elements but it seems is 2 in 1. All cabling will be industrial servo cable rated for flex drag chain instalations. No crap stuff. I am just having also problems with the cables of the printer i borrowed.

here is link to the cheapest best quality cables i have found after long sleepless nights searches. These are not for the printer, i will look further, but just to see prices. have bought from there flexible thermoresistant cable for soldering gun also, which is superb for the price.
servos

http://www.tme.eu/en/details/str-c-p...lukabel/49637/


shielded cable for the proximity sensors:

http://www.tme.eu/es/details/str-c-p...lukabel/49632/





The cable chain is ready and tested. It had some final adjustments and i am 99% happy with it.. Its printed but i have designed it as a commercial quality chain. So its 2 in 1. What do you think? It seems to me bnetter than the one they use in the printer i have here





here are the files http://www.thingiverse.com/thing:1963745