Thread: Mach3 licence
-
20-12-2016 #1
Need some help/advice
I'm going to buy the mach3 licence which site is the best to download from and secondly does it upset my settings in anyway.
-
20-12-2016 #2https://emvioeng.com
Machine tools and 3D printing supplies. Expanding constantly.
-
21-12-2016 #3
Happy days that's good to know thanks
-
21-12-2016 #4
I bought mine from here....https://robocutters.co.uk/products.asp?cat=52...
It's bit cheaper
Martin
-
21-12-2016 #5
Martin when u purchase it do they send a code there or what happened ?
-
22-12-2016 #6
They send you a link to download and give you a licence code
-
22-12-2016 #7
Last edited by JAZZCNC; 22-12-2016 at 06:30 PM.
-
22-12-2016 #8
If you buy from a third party vendor you will need to approach them should you ever need replacement of your license file,
- NickYou think that's too expensive? You're not a Model Engineer are you? :D
-
28-12-2016 #9
Got it installed ok and everything is working good thanks guys
-
22-07-2017 #10
Just to extend my thanks to Jim Dingus in Mach3 tech support. After losing my licence file (no! not too many points on it) I got a download reference emailed to me within 24 hours. I had customised the licence via Mach3 support, so they had my details and could re-issue.
I will not go back to the original licence vendor as my barge pole won't reach Devon.
Cheers,
Rob
Thread Information
Users Browsing this Thread
There are currently 10 users browsing this thread. (0 members and 10 guests)
Bookmarks