Threaded View
-
03-01-2017 #2
Ouch.!! Yes touch aggressive.
Just Did test to see what i-machining would spit out for same material and cutter/flutes etc at it's most aggressive setting which is level 8.
So for simple circle pocket 15mm DOC gave 16810rpm 3769 feed 1.970mm stepover.
Level 3 or 4 is what I normally run at.
Level 3 12878rpm 2117 feed 1.116 step
level 4 13431rpm, 2233 feed 1.550 step
What feeds and RPM was that.?Last edited by JAZZCNC; 03-01-2017 at 05:44 PM.
-
The Following User Says Thank You to JAZZCNC For This Useful Post:
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
first move not clearing material
By kell in forum Artsoft Mach (3 & 4)Replies: 15Last Post: 01-04-2016, 04:15 PM -
CNC Project - VESA Monitor Mounts using Fusion 360 Adaptive Clearing Toolpath
By Washout in forum Metalwork Project ShowcaseReplies: 8Last Post: 02-11-2015, 10:32 PM -
First go at Fusion 360 Adaptive Clearing
By Washout in forum Fusion 360Replies: 0Last Post: 15-10-2015, 07:52 PM
Bookmarks