. .
Page 3 of 3 FirstFirst 123
  1. #21
    Thank you! So far everything is working well.

    The only problem I had with this quick tool change was that on one occasion the tool holder started to slip out as I cut with an 8mm endmill. The Bellevilles had been tighten by two full turns of the drawbar (after finger tightening) and it seems that the tool wasn't getting enough grip by the collet. So I increased the Belleville tightening to just over 3 turns of the drawbar, and now it seems to be gripping properly. These things always need a little fine tuning...

    Edward

  2. #22
    Quote Originally Posted by njhussey View Post
    And pictures, we like pictures 😁

    Sent from my HUAWEI VNS-L31 using Tapatalk
    Last edited by DamnYank; 17-10-2018 at 11:20 PM.

  3. #23
    Old thread I know, Edward, what did you do re. Spindle speed control?, or have you left it manual?

    I’m half way through my SX2.7 conversion with many thanks to this thread

  4. #24
    Hi Edward do you have a set of plans available as sx2.7 conversion kits are not available in UK mostly USA I have not seen any plans floating about on internet yet it would be wonderful if you could supply plans in pdf format or even better dfx if you can to help others

    Thanks Andrew

Page 3 of 3 FirstFirst 123

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Sieg X3 Conversion
    By Vikash in forum Milling Machines, Builds & Conversions
    Replies: 8
    Last Post: 04-01-2016, 05:18 PM
  2. CONVERSION: Need some help with a new SIEG SX2 Plus CNC Conversion
    By Onocyclone in forum Conversion Build Logs
    Replies: 22
    Last Post: 17-09-2014, 01:00 PM
  3. CONVERSION: Sieg X2 CNC Conversion
    By A11an in forum Conversion Build Logs
    Replies: 17
    Last Post: 16-01-2013, 06:06 PM
  4. CNCFusion Sieg X1 CNC Conversion Kit
    By rd84 in forum Gantry/Router Machines & Building
    Replies: 4
    Last Post: 13-07-2011, 03:38 PM
  5. Sieg sx2 conversion kit
    By Goldigger in forum Milling Machines, Builds & Conversions
    Replies: 3
    Last Post: 24-04-2011, 07:42 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •