Thread: Greetings from Ireland
Hi all, happy to have found this forum, glad it exists. I'm still sick from a 3 day New Years Eve session, so apologies if this post is a mess.
I work in IT, and use my wages to buy tools and materials, mainly steel and sometimes wood. I'm a master at neither, but am of an artistic bent, and occasionally have original ideas.
So what I'd like to do is go into small scale manufacturing. Generally I tend to make furniture, and I have a table in mind that
I think would be a good starting point. I think a limited run of ten or so would be a good number, and then try see can I flog them.
So my plan for 2017 / 2018 is to build or buy a plasma table.
I have been sucked into seveal projects and at this stage, and appreciate that they can be a very very deep hole.
Is there an easy way to build a CNC table?
Or maybe there is a thread on here that would make a good template for one....
I'll have a read through and see what I find. Its always a bit daunting standing on the edge of an subject like this and thinking, 'I know nothing about this stuff'.
I can assemble and disassemble things all day long, and am okay with software, so I think maybe its something I can do.
Last year I bought a Hypertherm Powermax 45, it has hardware on it that enable it to be used with a table.
I think if managed to do this I would probably try to built very large sculptures also, seeing as how I could then use a single 8x4 sheet as a building block.
That sounds fun.
Anyways, appreciate your reading this,
NEW MEMBER: Hello from IrelandBy redtom99 in forum New Member IntroductionsReplies: 0Last Post: 24-04-2016, 03:09 PM
NEW MEMBER: Hi from Ireland. I am new to CNC.By Horsesea in forum New Member IntroductionsReplies: 7Last Post: 17-01-2016, 05:00 PM
NEW MEMBER: Hi all from IrelandBy liamo1991 in forum New Member IntroductionsReplies: 4Last Post: 05-09-2013, 05:17 PM
NEW MEMBER: Hi, New guy here from N.IrelandBy stevy123 in forum New Member IntroductionsReplies: 1Last Post: 24-08-2011, 02:12 PM
NEW MEMBER: Hello from IrelandBy bgarvanman in forum New Member IntroductionsReplies: 1Last Post: 27-10-2008, 03:55 PM