Hybrid View
-
11-01-2017 #1
So if you are following the usual dimensions you will find the a M10x1.5 does not pass over the 8mm section. We typically use M10x1.0 as it also allows you to get a finer adjustment on the locking nut.
In answer to your original question, if you have rolled screws, then yes, you can use a die. I have done this with a M10x1.0 and as long as you are square on, you will be fine. You may need to use more lube than usual here.https://emvioeng.com
Machine tools and 3D printing supplies. Expanding constantly.
-
The Following User Says Thank You to komatias For This Useful Post:
-
11-01-2017 #2
Thanks a lot! That's great news as I do have rolled ballscrews...
I knew if asked long enough someone would give me the answer I wanted!
Also my whack idea about the rotary table as screw cutting lathe ain't gonna work as the 2MT small end in the table is smaller than 16mm...
So carefully by hand with plenty of lube it is... sounds familiar!Last edited by noyloj; 11-01-2017 at 11:45 PM.
-
I knew if asked long enough someone would give me the answer I wanted!..Clive
The more you know, The better you know, How little you know
-
11-01-2017 #4
-
12-01-2017 #5
Post it to me with the nut you want to use and I'll cut the thread on my lathe for the price of return postage.
Edit: Sorry I'm retracting that offer - I don't think this will help you as much as it might at first appear.
John S hit the nail on the head with "They can be screwcut with tipped tooling but I wouldn't fancy my chances with a die.".Last edited by Jonathan; 12-01-2017 at 12:31 AM.
-
The Following User Says Thank You to Jonathan For This Useful Post:
-
12-01-2017 #6
Because John S has done it hundreds of times with his own compact design for mounting the motor, bearing, nut and coupling.
Patented that is as well.
No sticking the motor on two plates and 4 pillars. Its a CNC machine not a fcuking clock.Last edited by John S; 12-01-2017 at 12:16 AM.
John S -
-
12-01-2017 #7https://emvioeng.com
Machine tools and 3D printing supplies. Expanding constantly.
-
12-01-2017 #8
-
The Following User Says Thank You to njhussey For This Useful Post:
-
12-01-2017 #9
Yes, that is a thing of beauty! I was thinking of a couple of bits of machined 4" x 2" angle ally machined up to form a square pr possibly welding up a few plates into a box kinda like the Damon CNC solution... Buerk! Clumsy in comparison but hopefully enough to get me to a position where I can CNC machine a neater solution...
Last edited by noyloj; 12-01-2017 at 06:48 PM.
-
12-01-2017 #10
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
I need Ballscrew end machined....what do I tell the Chinese bloke doing the work?
By HankMcSpank in forum General DiscussionReplies: 10Last Post: 23-02-2017, 07:24 PM -
Thread cutting on Solidcam
By eamo1978 in forum SolidworksReplies: 0Last Post: 27-06-2014, 09:12 AM -
Yet another Chinese 3020 CNC upgrade thread!
By Pointy in forum Machine DiscussionReplies: 31Last Post: 18-02-2014, 01:04 PM -
Multi thread cutting
By cropwell in forum Metalwork DiscussionReplies: 12Last Post: 03-10-2013, 10:32 PM -
Not Just another Boxford tcl 125 thread....
By cooliced in forum Boxford LathesReplies: 135Last Post: 18-08-2011, 10:15 PM
Bookmarks