1. I bought these with the intent of trying out PathPilot, however I've just not had the time to do that, and I've decided to have a cull of projects along with a clear out, so these are first to go

    Mesa 5i25 and 7i76 boards, plus the connecting cable. I bought them via here for 150, so I think it's only fair I resell them for the same price, even though the exchange rate has changed quite a bit since I bought them.
    They are still in the original packaging I received them in, and the only thing I've done, is open the box, have a look and put them back. I don't think they've even been out the original antistatic bags.
    Avoiding the rubbish customer service from AluminiumWarehouse since July '13.

  2. #2
    is the 5i25 pc or pcx edit I think the 6i25 is the pcix
    Last edited by Clive S; 11-01-2017 at 10:20 PM.
    ..Clive
    The more you know, The better you know, How little you know

  3. #3
    Hi MC - if you still have the Mesa boards, I'll buy them.
    I'm new to the forum, so have not found out how to PM yet.

  4. #4
    NB70's Avatar
    Lives in Swansea, United Kingdom. Last Activity: 2 Days Ago Has been a member for 8-9 years. Has a total post count of 44. Received thanks 5 times, giving thanks to others 3 times.
    I would be interested

  5. #5
    Quote Originally Posted by NB70 View Post
    I would be interested
    These two boards will make a very good motion control setup if you are into Linuxcnc with plenty of inputs and outputs including encoder. I have this combo myself.
    ..Clive
    The more you know, The better you know, How little you know

  6. #6
    NB70's Avatar
    Lives in Swansea, United Kingdom. Last Activity: 2 Days Ago Has been a member for 8-9 years. Has a total post count of 44. Received thanks 5 times, giving thanks to others 3 times.
    Thanks Clive, that's what I'm planning - I'm using Linuxcnc at the moment via the parallel port, but my current PC is getting unreliable & needs to be retired - its difficult to find PCs with good enough latency for software stepping through the parallel port.
    Nathan

  7. #7
    Quote Originally Posted by NB70 View Post
    Thanks Clive, that's what I'm planning - I'm using Linuxcnc at the moment via the parallel port, but my current PC is getting unreliable & needs to be retired - its difficult to find PCs with good enough latency for software stepping through the parallel port.
    Nathan
    That,s the beauty using the 5i25 (it needs a pci slot) the latency is not so much of an issue as the step generation is done on the card.
    ..Clive
    The more you know, The better you know, How little you know

  8. #8
    If they are still for sale I would be interested.
    cheers

  9. Boards are now sold.
    Avoiding the rubbish customer service from AluminiumWarehouse since July '13.

Similar Threads

  1. WANTED: Mesa Cards
    By Ross77 in forum Items Wanted
    Replies: 4
    Last Post: 14-07-2016, 11:17 AM
  2. FOR SALE: Mesa control boards
    By drumsticksplinter in forum Items For Sale
    Replies: 2
    Last Post: 09-05-2016, 09:02 PM
  3. NEW MEMBER: Greetings from Mesa, AZ USA
    By Marty_Escarcega in forum New Member Introductions
    Replies: 1
    Last Post: 11-09-2010, 09:37 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •