My Build - I blame you lot for this....!

[HiltonSteve]

I am back....!

Got a little bit sidetracked last year building an extension on my house, all finished now so hopefully more time for playing in the workshop

I get quite a few emails regarding this machine build so if anyone does have any questions then put them on here so that everyone can benefit from them.

[MikeyC38]

Hi HiltonSteve

Well Thanks to your "inspirational" build log I've finally got my design sorted out http://www.mycncuk.com/forums/showth...gn-Build/page4 and now trying source aluminium plate for the build. And I've got bathrooms to refurbish

Cheers
Mike

[JoeHarris]

now trying source aluminium plate for the build
e

Hi, only new to this but been designing and redesigning for a decent while now, I'm sure you all know the feeling! I have come across aluminium warehouse http://www.aluminiumwarehouse.co.uk/cutting_calc.php - they sell cast plate at what seems a reasonable price.... Fantastic build by the way Steve I am going to shamelessly plagiarise!

Joe

[Jonathan]

Aluminium warehouse is good, however I recently needed to order quite a large amount of aluminium (about 300kg) so shopped around and found this place was quite a lot cheaper:

http://www.ascmetals.com/

[John S]

Aluminium warehouse is good, however I recently needed to order quite a large amount of aluminium (about 300kg) so shopped around and found this place was quite a lot cheaper:

http://www.ascmetals.com/

I fooking told you so three years ago - dipshit.

[audioandy]

I fooking told you so three years ago - dipshit.

You certainly have a way with words John

[JAZZCNC]

I fooking told you so three years ago - dipshit.

John this is what makes you so SPECIAL!! .