My Build - I blame you lot for this....!

[HiltonSteve]

Thats a nice bit of allow steve, where did you get that from? and looking at the photo has it been faced flat?

Found it.....:whistling:

[AdCNC]

lol not at johns then. did you "find it" nice and true faced? :P

[HiltonSteve]

No, did not borrow it from John...!lol

Made my entire machine out of the same grade and yes it comes in with a ground finish, really nice to work with.

[John S]

He couldn't borrow it from me, he's borrowed everything else there nothing left..........................

.

[HiltonSteve]

He couldn't borrow it from me, he's borrowed everything else there nothing left..........................

.

I'm sure I could find something...

See you Tuesday!

Have you eaten all those hobnobs yet? Tesco are doing them 2 for 1 so can bring plenty round to keep you occupied...:heehee:

[HiltonSteve]

Right, drawing attached of proposed hole layout for bed.

Machine should be able to drill most of the holes but won't be able to tap them.

Just the 380 holes to tap by hand then......:confused:

[John S]

I've got an air tapper, 20p per hole, hows that sound ?
.

[HiltonSteve]

I've got an air tapper, 20p per hole, hows that sound ?
.

Sounds bloody brilliant.

Just re-designed it and it now only has 4 holes in, when can I come and 'borrow it' and drop the 80p off?

[ptjw7uk]

Perhaps he'll except hobnobs in payment! may work out cheaper!

Peter

[John S]

Sounds bloody brilliant.

Just re-designed it and it now only has 4 holes in, when can I come and 'borrow it' and drop the 80p off?

In words of one syllable - get stuffed