-
31-01-2017 #11
-
01-02-2017 #12
-
06-02-2017 #13
Hi All,
I have read your comments and I will have to consider what to do. And although I - as you undoubtedly have noticed - had hoped that your replies would go in a different direction I nevertheless appreciate your considering & replying to this thread.
I also hope that you will let me know should you by any chance come across something that goes in the direction I've described (although it seems only remotely possible) ...
paulus.v. you have PM.
Cheers to you ;-)
Jesper
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Small Fixed Gantry Router Spec and Build
By shaunrod in forum Gantry/Router Machines & BuildingReplies: 7Last Post: 29-07-2016, 06:55 PM -
Advice on Mammoth CNC Router Build - Steel Framed - 2440mm x 1220mm cutting area!
By Wejjmeister in forum Gantry/Router Machines & BuildingReplies: 87Last Post: 03-01-2016, 12:45 AM -
New member looking for advice on a good quality machine (brand)
By steve78 in forum Marketplace DiscussionReplies: 1Last Post: 16-08-2014, 09:25 PM -
BUILD LOG: my router build - advice needed
By thomashomer1986 in forum DIY Router Build LogsReplies: 10Last Post: 02-12-2013, 11:45 PM -
BUILD LOG: New cnc router build looming, advice needed
By Mad Professor in forum DIY Router Build LogsReplies: 5Last Post: 06-11-2012, 08:12 PM
Bookmarks