Thread: 10mm belt nema23
Hybrid View
-
28-01-2017 #1
It is not that simple to get the pulley tooth size. You have the pitch line, which corresponds to the belt insertion, where the belt bends. From there you calculate the gap between the teeth to correspond to the belt teeth dimension. The teeth on a smaller diameter pulley are narrower than those on a bigger diameter...
If you tension enough the belt you'll have no backlash even with a smooth belt. The teeth are there for timing ... at times
-
-
29-01-2017 #3
-
-
29-01-2017 #5
-
-
30-01-2017 #7
-
I tried to buy one but it did not go well. The shipping estimate didn't work. I soldiered on, didn't flinch when one pulley plus shipping came to £14.23, typed in all my details, took the PayPal option. A message came up, PayPal not available and they wanted me to start typing all over again. I just don't have the stamina I used to
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
10mm belt and nema 23
By kev20009 in forum Belt Drive, Pulleys & TimingReplies: 0Last Post: 27-01-2017, 11:52 AM -
eBay Nema23 Stepper mounts
By Slixxor in forum Gantry/Router Machines & BuildingReplies: 7Last Post: 05-06-2016, 05:02 PM -
Anyone have a UK source for open ended 10mm T5 Polyurethane belt
By cweeks in forum Linear & Rotary MotionReplies: 18Last Post: 19-03-2016, 09:43 AM -
RFQ: RFQ Nema23 stepper mount
By r0bsk1 in forum Projects, Jobs & RequestsReplies: 0Last Post: 15-02-2014, 02:16 PM -
DIY Nema23 Motor Mounts
By Lee Roberts in forum Gantry/Router Machines & BuildingReplies: 5Last Post: 23-08-2009, 06:08 PM
Bookmarks