Thread: Can't Get my New Machine to work
Threaded View
-
03-02-2017 #1
Hi im still having problems getting my router working it's a 6040 with a 1500w motor. there doesn't seem to be any kind of a signal from Mach 3 to the machine,none of the motors have even tried to work. in the Mach 3 diagnostic's page port 1 pins current state are not light, is this correct. output signal 1 enable 1 is light.
there is a red stop led light on the control box If i disconnect the parallel cable this light goes off, any help would be appreciated
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Needs helps to see if will work this machine.
By samsagaz in forum Gantry/Router Machines & BuildingReplies: 0Last Post: 17-07-2016, 12:12 AM -
!Ewbie needs help with setting machine and work origins.p
By Moonshadow in forum General DiscussionReplies: 3Last Post: 04-05-2016, 10:30 PM -
Will steel angle work for a decent machine?
By amd7000 in forum Gantry/Router Machines & BuildingReplies: 13Last Post: 06-06-2015, 12:47 PM -
WANTED: Wanted: Small Metal Work Milling Machine
By 07trb in forum Items WantedReplies: 0Last Post: 04-03-2011, 06:58 PM -
Already built my machine.. but some pics of work etc
By Yohudi in forum Gantry/Router Machines & BuildingReplies: 5Last Post: 31-08-2007, 06:15 PM
Bookmarks