Page 1 of 3 123 LastLast
  1. #1
    Hey guys, been a while. I decided to swap out the Edding CNC for a CSLABS unit. Not that I had anything against Bert at Eding, in fact I can't not recommend his services enough! After sales are amazing!!

    Anyway I'm looking for a little help controlling the spindle speed and on and off signal wording for the above controller, can anyone help with a diagram?

    Here's the unit all wired in

    Last edited by D-man; 04-02-2017 at 01:17 AM.

  2. #2
    Nicely done.
    UCCNC 2017 Screenset

    Mach3 2010 Screenset

    JointCAM - CAM for Woodworking Joints

  3. #3
    Cheers Ger

    Sent from my iPhone using Tapatalk Pro

  4. #4

  5. The Following User Says Thank You to Web Goblin For This Useful Post:

  6. #5
    Cheers Ian, yeah it does however, do you know what terminals I connect to on the VFD?
    Unless I'm missing it on the drawing (on a phone)

    Sent from my iPhone using Tapatalk Pro

  7. #6
    If you zoom in on the picture it shows the terminals on the vfd for forward, reverse and a reset if you need it. DCM and FOR for forward rotation and DCM and REV for reverse rotation. The signals from DCM to terminals FOR and REV are switched via relay NO contacts.

  8. #7
    Sorry zooming in and trying to find things. I now see it, cheers for that I will give it a pop tomorrow

    Sent from my iPhone using Tapatalk Pro

  9. #8
    The info for setting in the cslabs plugin is also there and the info for parameters to be set on the vfd.

  10. #9
    Yeah I've found them. When you say plugin, you mean there is a plugin for CSMIO-IP A to install also?

    Sent from my iPhone using Tapatalk Pro

  11. #10
    Yes, you will need the cslabs plugin as well. Its on the cslabs controllers download page.

Page 1 of 3 123 LastLast

Similar Threads

  1. Chinese 300W DC spindle - is the spindle shaft grounded?
    By HankMcSpank in forum Spindles & Drive Motors
    Replies: 44
    Last Post: 26-11-2016, 07:25 PM
  2. 1.5Kw Chinese Spindle help
    By Hasanain in forum Generic Chinese Spindles
    Replies: 3
    Last Post: 26-05-2016, 10:38 AM
  3. FOR SALE: 1.5kw chinese spindle with VFD
    By discodave in forum Items For Sale
    Replies: 0
    Last Post: 17-06-2014, 07:05 PM
  4. WANTED: Chinese 1.5kw spindle/vfd
    By Philly in forum Items Wanted
    Replies: 5
    Last Post: 10-02-2013, 11:44 AM
  5. WANTED: Spindle holder for 1.5kw Chinese spindle.
    By jcb121 in forum Items Wanted
    Replies: 19
    Last Post: 14-10-2011, 02:07 PM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts