. .
Page 3 of 3 FirstFirst 123
  1. #21
    I was referring more to the servo drives not Mach3 or CSMIO. Their manual is shite, it doesn't give enough explanation to a person who's new to them for setting up.
    I can see the position gain etc section. But all it does is give you the parameters not an explanation as to what they will do etc.

    For example




    Sent from my iPhone using Tapatalk
    Last edited by D-man; 06-02-2017 at 07:48 AM.

  2. #22
    Servo's are generally not used by beginners and therefore they assume the person installing them knows what there doing.!!

    What control mode have you got it set too.? . . . I suspect it will be position seen as you used Step/Dir before and you want it set to Speed control.

    Then looks like P29,P23,P24 could be the PID settings but without rest of manual it's hard to tell.

  3. #23
    Quote Originally Posted by JAZZCNC View Post
    Servo's are generally not used by beginners and therefore they assume the person installing them knows what there doing.!!

    What control mode have you got it set too.? . . . I suspect it will be position seen as you used Step/Dir before and you want it set to Speed control.

    Then looks like P29,P23,P24 could be the PID settings but without rest of manual it's hard to tell.
    Yeah I get that, but we all have to start somewhere, right? And what a better place to learn than Jazz, sorry I mean MYCNCUK

    I believe it's set to analog I will have to double check, I set it up just like your video of yours, where the DRO always know it's position.

    Manual can be seen here if you want a quick look
    https://www.dropbox.com/s/4tzmmea9ip...81%29.pdf?dl=0




    Sent from my iPhone using Tapatalk Pro

Page 3 of 3 FirstFirst 123

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Chinese 300W DC spindle - is the spindle shaft grounded?
    By HankMcSpank in forum Spindles & Drive Motors
    Replies: 44
    Last Post: 26-11-2016, 07:25 PM
  2. 1.5Kw Chinese Spindle help
    By Hasanain in forum Generic Chinese Spindles
    Replies: 3
    Last Post: 26-05-2016, 10:38 AM
  3. FOR SALE: 1.5kw chinese spindle with VFD
    By discodave in forum Items For Sale
    Replies: 0
    Last Post: 17-06-2014, 07:05 PM
  4. WANTED: Chinese 1.5kw spindle/vfd
    By Philly in forum Items Wanted
    Replies: 5
    Last Post: 10-02-2013, 11:44 AM
  5. WANTED: Spindle holder for 1.5kw Chinese spindle.
    By jcb121 in forum Items Wanted
    Replies: 19
    Last Post: 14-10-2011, 02:07 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •