. .
  1. #1
    Mach3 or grbl in terms of software? And why?
    For a 6 axis cnc machine that is dual spindle and must be capable of double sided fsw and isf.

  2. #2
    Mach3, because GRBL has a fraction of the features that Mach3 has.
    But I won't use Mach3 on any new machines, as it's obsolete imo.
    I'm using UCCNC going forward, including on a dual spindle router I'm building.

    I'm not aware of any low cost control that supports dual spindles, so a bit of customization is required, depending on how you want them to work.
    Gerry
    ______________________________________________
    UCCNC 2022 Screenset

    Mach3 2010 Screenset

    JointCAM - CAM for Woodworking Joints

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 70V too much for my motors?
    By sinnsvak in forum Stepper & Servo Motors
    Replies: 5
    Last Post: 02-07-2016, 04:34 PM
  2. stepper motors
    By reefy86 in forum Gantry/Router Machines & Building
    Replies: 4
    Last Post: 06-09-2015, 12:54 PM
  3. Help with Stepper Motors
    By Scott in forum Stepper & Servo Motors
    Replies: 8
    Last Post: 04-04-2010, 02:35 PM
  4. help with motors
    By soyeb in forum Motor Drivers & Controllers
    Replies: 1
    Last Post: 27-12-2009, 10:23 PM
  5. motors in the UK
    By sensph in forum Stepper & Servo Motors
    Replies: 12
    Last Post: 28-08-2008, 11:30 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •