. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 19-02-2017 #1
    Len-Tikular's Avatar
    Lives in Shaw Nr Oldham, United Kingdom.
    Len-Tikular
    Last Activity: 12-05-2023 Has been a member for 9-10 years. Has a total post count of 22.
    I'm back to converting my Boxford TCL160 after quite a long break.
    I'm using ESS Smoothstepper with a CM106 BOB and MAch3 Turn
    The Spindle and X and Z axis are now all working.
    I now need to hook up the original encoder to give me the speed of the Spindle.
    The disc on the end of the spindle shaft has 100 holes and on the outer rim there is one hole.
    There is a dual slotted opto used to sense the speed. is has 4 wires, yellow,red,blue,green,

    I need to hook these into my breakout board which is a CM106
    Attached Thumbnails Attached Thumbnails Click image for larger version.  Name: CM106.jpg  Views: 217  Size: 58.7 KB  ID: 20855   Click image for larger version.  Name: Slotted.jpg  Views: 174  Size: 75.0 KB  ID: 20856  
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Chinese 300W DC spindle - is the spindle shaft grounded?
    By HankMcSpank in forum Spindles & Drive Motors
    Replies: 44
    Last Post: 26-11-2016, 07:25 PM
  2. TB6560 controller Runs spindle on power up When Mach3 plunges spindle stops
    By RoyT in forum Spindles & Drive Motors
    Replies: 5
    Last Post: 29-09-2014, 02:42 PM
  3. SOLD: Indexer, ISEL CSD 405-IMC and GFM 4433 controllers
    By badgerman in forum Items For Sale
    Replies: 7
    Last Post: 27-06-2014, 10:46 AM
  4. CNC Spindle Repair and Spindle Replacement for any Machine of any Manufacturer
    By spindeldoctor in forum Manufacturer News
    Replies: 0
    Last Post: 13-11-2013, 07:50 PM
  5. DIY Spindle - What type of bearings are best suited for a spindle.
    By 8iggles in forum Spindles & Drive Motors
    Replies: 18
    Last Post: 09-02-2011, 10:15 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules