Cambam with Mach3

[ladybreaker]

Hello everyone, hope someone can sort my problem out.
I'm trying to cut a frame out of a 2mm carbone fibre
I'm using cambam to generate toolpath and produce gcode, but once I load the file on mach3, the display only shows on cutout.
PLease see attached photo
Thank you
Sorry If I posted this in the wrong section and I'm new in CNC

[Fred]

Attach your CamBam file and g code and I'll take a look. Maybe check that you don't have a zero depth of cut or something like that.

[ladybreaker]

Here it is

Thanks

[ladybreaker]

Here are both files

Thanks

[Clive S]

Here it is

Thanks

What is the actual problem you have as the gcode file appears to be ok

[ladybreaker]

I Clice

As I tryed to explain in the first post, when I Load G code to Mach3 the display shows only the circle on top of the profile and the rest of the cutout sre not visible,actualy they are not there at all. I tryed to run it on a piece of plywood and it only cut the circle !!

[Clive S]

I Clice

As I tryed to explain in the first post, when I Load G code to Mach3 the display shows only the circle on top of the profile and the rest of the cutout sre not visible,actualy they are not there at all. I tryed to run it on a piece of plywood and it only cut the circle !!

Ok I am not quite sure what you are saying But have you got the size (dia.) of the tool too big ie will it actually fit into the places where it is suppose to fit.