Page 1 of 2 12 LastLast
  1. #1
    Hi!

    Anyone tried the 2DM860H chinese controllers?

    Any good?

    They probably cant beat the AM882 or EM806, Im aware of that.
    But a damn bit cheaper

  2. #2
    Aaaw come on, doesn't anyone have experience?
    It might just be an dm860 in a new box :D

  3. #3
    Nope....AM882 only for me sorry.....

    Sent from my HUAWEI VNS-L31 using Tapatalk
    Neil...

    Build log...here

  4. #4
    I know I should go the same route. But the cost makes me look around hehe

  5. #5
    Thing that persuaded me was they were tried and tested by others. My machine was cutting acetal plastic all day today and just doesn't miss a beat...priceless 😁

    Sent from my HUAWEI VNS-L31 using Tapatalk
    Neil...

    Build log...here

  6. #6
    Quote Originally Posted by Nr1madman View Post
    I know I should go the same route. But the cost makes me look around hehe
    Why not buy some and review them for us? :D

    I've learned that cheap parts often aren't the cheapest way ;-)
    You think that's too expensive? You're not a Model Engineer are you? :D

  7. #7
    Quote Originally Posted by magicniner View Post
    Why not buy some and review them for us? :D

    I've learned that cheap parts often aren't the cheapest way ;-)
    Haha I know that this is good advice :D
    But Im leaning towards the am882 because of the stall detect. I will be using 2 motors for x axis and it would be disaster if one was stalling..
    Deep inside I know that this is the wrong place to save £50

  8. #8
    I had to try these :D
    Call me an idiot but who knows. .they might work just fine hehe

    How should the dip switches for current be adjusted? Peak current or RMS current?

    On the drivers there are rj45 jacks.. I wonder if there are some software for tuning?
    Got no manuals so I think I'm gonna search the Web for something useful :)

    Skickat från min SM-N910C via Tapatalk

  9. #9
    Quote Originally Posted by Nr1madman View Post
    Got no manuals so I think I'm gonna search the Web for something useful :)
    Starting to see why "cheap" isn't always Cheap? :D
    You think that's too expensive? You're not a Model Engineer are you? :D

  10. #10
    Quote Originally Posted by magicniner View Post
    Starting to see why "cheap" isn't always Cheap? :D
    Haha I know, I know!
    Found the manual online atleast :D
    It actally had info about the connector I wondered about. Was serial connection for parameters. :) Have to look up what kind of software to rule this thing!!

    Skickat från min SM-N910C via Tapatalk

Page 1 of 2 12 LastLast

Similar Threads

  1. CNC Project - Guitar Neck (and the rest if I can get away with it)
    By Washout in forum Woodworking Project Showcase
    Replies: 75
    Last Post: 31-03-2017, 10:29 AM
  2. Higher end Chinese controllers?
    By m_c in forum Motor Drivers & Controllers
    Replies: 51
    Last Post: 22-10-2016, 10:04 PM
  3. Foot Rest Project and how I did nesting in Fusion 360
    By Washout in forum Woodworking Project Showcase
    Replies: 2
    Last Post: 24-09-2016, 11:57 AM
  4. Windows 10, is it better than the rest?
    By magicniner in forum Computer Software
    Replies: 20
    Last Post: 11-06-2016, 02:00 PM
  5. NEW MEMBER: Back after a little rest
    By bogstandard in forum New Member Introductions
    Replies: 3
    Last Post: 27-02-2015, 07:12 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •