Page 4 of 4 FirstFirst ... 234
  1. #31
    Look slike you have no speed set so it's running but at Zero speed.

  2. #32
    Quote Originally Posted by JAZZCNC View Post
    Look slike you have no speed set so it's running but at Zero speed.
    Ok gimme a min to wire up as per pic


    Sent from my iPhone using Tapatalk Pro

  3. #33
    Quote Originally Posted by D-man View Post
    So wire up as per picture and change parameters you mentioned and also accel ?


    Sent from my iPhone using Tapatalk Pro
    Yes if it starts then try lowering the Accel until it doesn't. Usually around 4-6 will work ok but depends on spindle.

  4. #34
    Ok it's doing something. It's controlling via the software but not firing up

    https://youtu.be/98LXdpYtOTw


    Sent from my iPhone using Tapatalk Pro

  5. #35
    Quote Originally Posted by D-man View Post
    Ok it's doing something. It's controlling via the software but not firing up

    https://youtu.be/98LXdpYtOTw


    Sent from my iPhone using Tapatalk Pro
    have you typed speed in try using MDI and type M3 s12000

  6. #36
    Quote Originally Posted by JAZZCNC View Post
    have you typed speed in try using MDI and type M3 s12000
    Yeah, just turns the VFD fan on but no spindle etc


    Sent from my iPhone using Tapatalk Pro

  7. #37
    Should I turn the other wires off in the VFD, maybe it's looking for those?(Green/red/yellow )


    Sent from my iPhone using Tapatalk Pro

  8. #38
    if this doesn't work then you probably not got voltage coming out of the eding so test voltage. @ s12000 you should have around 5v

  9. #39
    ring me if still got number

  10. #40
    Ok Guys had a bit time to revisit this. Your help would be very much appreciated.

    The above options donít work, however after a bit of fiddling, UV managed to get the spindle to switch on and off with the software.

    My question is, what will control the speed? Iíve got 0-10v coming from the PWM and increases when spindle speed on the pendant wheel.
    Iíve tried connecting to AC1&2 and also VC1&2 with no luck. Iím guessing itís a setting in the VFD but I canít see it.

    Itís also worth mentioning that if I put PWM to X1-2-3 or 4 I get a separate set speed on each.

    Please help guys, half way there!

    https://youtu.be/b2cbv0fuKj4



    Sent from my iPhone using Tapatalk

Page 4 of 4 FirstFirst ... 234

Similar Threads

  1. FOR SALE: Eding cnc controller
    By Web Goblin in forum Items For Sale
    Replies: 4
    Last Post: 01-08-2016, 03:31 PM
  2. Eding cnc
    By Ben-bee in forum CAD & CAM Software
    Replies: 0
    Last Post: 17-05-2016, 08:48 PM
  3. Setting ADTECH servos with Eding CNC software steps/AppUnit
    By D-man in forum Stepper & Servo Motors
    Replies: 55
    Last Post: 24-04-2016, 02:50 PM
  4. CONVERSION: Sieg X2 super with ball screws and Eding CNC controle
    By Soren DK in forum Conversion Build Logs
    Replies: 2
    Last Post: 11-04-2016, 08:40 PM
  5. Eding CPU5A4E controller and Siemens G110 VFD.
    By calgone in forum EdingCNC (CPU5, CPU5A)
    Replies: 4
    Last Post: 06-02-2015, 11:31 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •