The Best Steppers/Servos Setup Thread

[m_c]

Andy, the main thing you have to consider, is what do you want to achieve?

Faster rapids, faster acceleration, better positioning, just to spend some money???

[JAZZCNC]

Andy, the main thing you have to consider, is what do you want to achieve?

Faster rapids, faster acceleration, better positioning, just to spend some money???

All Good Questions but also while at it ask your self WHY.?

Do you really need machine that travels at light speed.? . . . . . At this size I'd say 100% not.!!
Do you really need machine that goes from 0 to 100 in 0.01's.? . . . . . . . . . . . Probably not.!!
Can machine handle the higher speeds.? . . . . . . . . . . . . . . . . . . . . . . . . . . Probably Not.!!
Can the rest of machine match the positioning accuracy.? . . . . . . . . . . . . . . .Probably not.!!

So only probable reason is because got money burning hole in pocket which is fine if your loaded.

[Chaz]

My Triac uses 400W Kinco servos and works well.

[andy_con]

were not talking about money here were talking about a good setup and a good setup doesn't come cheap.

anything is cheaper than buying datron or haas machine.